ARM Microcontroller LPC2368FET100518 (MCU-16/32bit)

The LPC2364/65/66/67/68 microcontrollers are based on a 16-bit/32-bit ARM7TDMI-S CPU with real-time emulation that combines the microcontroller with up to 512 kB of embedded high-speed flash memory. A 128-bit wide memory interface and a unique accelerator architecture enable 32-bit code execution at the maximum clock rate. For critical performance in interrupt service routines and DSP algorithms, this increases performance up to 30 % over Thumb mode. For critical code size applications, the alternative 16-bit Thumb mode reduces code by more than 30 % with minimal performance penalty.

FEATURES:

1. ARM7TDMI-S processor, running at up to 72 MHz
2. Up to 512 kB on-chip flash program memory with In-System Programming (ISP) and
3. In-Application Programming (IAP) capabilities. Flash program memory is on the ARM
4. local bus for high performance CPU access.
5. 8 kB/32 kB of SRAM on the ARM local bus for high performance CPU access.
6. 16 kB SRAM for Ethernet interface. Can also be used as general purpose SRAM.
7. 8 kB SRAM for general purpose DMA use also accessible by the USB.
8. Dual Advanced High-performance Bus (AHB) system that provides for simultaneous
9. Ethernet DMA, USB DMA, and program execution from on-chip flash with no
10. contention between those functions. A bus bridge allows the Ethernet DMA to access
11. the other AHB subsystem.
12. Advanced Vectored Interrupt Controller (VIC), supporting up to 32 vectored interrupts.
13. General Purpose DMA controller (GPDMA) on AHB that can be used with the SSP
14. serial interfaces, the I2S port, and the Secure Digital/MultiMediaCard (SD/MMC) card
15. port, as well as for memory-to-memory transfers.

SPECIFICATIONS:

1. Mounting Style: SMD/SMT   
2. Package / Case: SOT-926    
3. Core: ARM7TDMI-S  
4. Data Bus Width: 32 bit/16 bit 
5. Maximum Clock Frequency: 72 MHz           
6. Program Memory Size: 512 kB         
7. Data RAM Size: 58 kB          
8. ADC Resolution: 10 bit          
9. Operating Supply Voltage: 3.3 V       
10. Processor Series: LPC23      
11. Interface Type: CAN, I2C, I2S, SPI, SSP, UART, USB       
12. Number of ADC Channels: 6
13. Number of I/Os: 70 I/O          
14. Number of Timers/Counters: 4 Timer           
15. Supply Voltage - Max:            3.6 V   
16. Supply Voltage - Min: 3 V      

RELATED DOCUMENTS:

1. Datasheet.

PACKAGE INCLUDES:

1. 1 X ARM Microcontroller LPC2368FET100518 (MCU-16/32bit)