Due to supply chain disruptions, inflation and changes in currency valuation, please be advised that price and delivery time is tentative and subject to change even after you place your order. Please contact us for updated price before making payment for your order. CLICK HERE for further details.

Standard Character HD44780 LCD (16x4)

SKU
MD-00053
PKR1,150.00
Quantity: 10
The HD44780 dot-matrix liquid crystal display controller and driver LSI displays alphanumerics,Japanese kana characters, and symbols. It can be configured to drive a dot-matrix liquid crystal displayunder the control of a 4- or 8-bit microprocessor. Since all the functions such as display RAM, character generator, and liquid crystal driver, required for driving a dot-matrix liquid crystal display are internally provided on one chip, a minimal system can be interfaced with this controller/driver.
The HD44780 dot-matrix liquid crystal display controller and driver LSI displays alphanumerics,Japanese kana characters, and symbols. It can be configured to drive a dot-matrix liquid crystal displayunder the control of a 4- or 8-bit microprocessor. Since all the functions such as display RAM, character generator, and liquid crystal driver, required for driving a dot-matrix liquid crystal display are internally provided on one chip, a minimal system can be interfaced with this controller/driver.

Specifications:
1) Low power operation support: 2.7 to 5.5V.
2) Wide range of liquid crystal display driver power: 3.0 to 11V
3) Liquid crystal drive waveform: A (One line frequency AC waveform)
4) Correspond to high speed MPU bus interface: 2 MHz (when VCC = 5V)
5) 4-bit or 8-bit MPU interface enabled.
6) Programmable duty cycles.
- 1/8 for one line of 5 ´ 8 dots with cursor.
- 1/11 for one line of 5 ´ 10 dots with cursor.
- 1/16 for two lines of 5 ´ 8 dots with cursor.
7) Wide range of instruction functions: Display clear, cursor home, display on/off, cursor on/off, display character blink, cursor shift,display shift.
8) Automatic reset circuit that initializes the controller/driver after power on.
9) Internal oscillator with external resistors.
10) Low power consumption.

Pin Configurations:
1) GND............Ground
2) VCC.............LCD Controller Power (+3 to +5V)
3) VLCD...........LCD Display Bias (+5 to -5V)
4) RS...............Register Select: H: Data L: Command
5) R/W..............H: Read L: Write
6) E...................Enable (Data strobe, active high)
7) DB0..............Data LSB
8) DB1..............Data
9) DB2..............Data
10) DB3..............Data
11) DB4..............Data
12) DB5..............Data
13) DB6..............Data
14) DB7..............Data MSB
15) A...................LED Backlight Anode (optional)
16) K...................LED Backlight Cathode (optional)
Part Number NA
Manufacturer Made in China
Weight (KG) 0.200000
Display Resolution (Pixels) NA
Ports NA
Screensize NA
Contrast Ratio NA
Only registered users can write reviews. Please Sign in or create an account