Due to supply chain disruptions, inflation and changes in currency valuation, please be advised that price and delivery time is tentative and subject to change even after you place your order. Please contact us for updated price before making payment for your order. CLICK HERE for further details.

Arty Board Artix-7 FPGA Development Board for Makers and Hobbyists

SKU
MD-00361
PKR19,650.00
Quantity: 0
Arty is a ready-to-use development platform designed around the Artix-7™ Field Programmable Gate Array (FPGA) from Xilinx.
  • Buy 2 for PKR18,550.00 each and save 6%
  • Buy 5 for PKR17,860.00 each and save 9%
  • Buy 10 for PKR17,270.00 each and save 12%

Arty is a ready-to-use development platform designed around the Artix-7™ Field Programmable Gate Array (FPGA) from Xilinx. It was designed specifically for use as a MicroBlaze Soft Processing System. When used in this context, Arty becomes the most flexible processing platform you could hope to add to your collection, capable of adapting to whatever your project requires. Unlike other Single Board Computers, Arty isn't bound to a single set of processing peripherals: One moment it's a communication powerhouse chock-full of UARTs, SPIs, IICs, and an Ethernet MAC, and the next it's a meticulous timekeeper with a dozen 32-bit timers. Additionally, with the universally popular expansion headers (Arduino™ R3 Headers and our Pmod™ headers), Arty will become the most adaptable tool in your project toolbox.

FEATURES:

  1. Xilinx Artix-35T FPGA
  2. 33,280 logic cells in 5200 slices (each slice contains four 6-input LUTs and 8 flip-flops);
  3. 1,800 Kbits of fast block RAM;
  4. Five clock management tiles, each with a phase-locked loop (PLL);
  5. Internal clock speeds exceeding 450MHz;
  6. On-chip analog-to-digital converter (XADC).
  7. Programmable over JTAG and Quad-SPI Flash
  8. 256MB DDR3L with a 16-bit bus @ 667MHz
  9. 16MB Quad-SPI Flash
  10. USB-JTAG Programming circuitry (USB Micro cable required, NOT INCLUDED).
  11. 10/100 Mbps Ethernet
  12. USB-UART Bridge
  13. 4 Switches
  14. 4 Buttons
  15. 1 Reset Button
  16. 4 LEDs
  17. 4 RGB LEDs
  18. Expansion Connectors:
  19. 4 Pmod connectors
  20. Arduino/chipKIT Shield connector
  21. Powered from USB or any 7V-15V source

PIN CONFIGURATIONS:

Pin configurations

Num

Description

Num

Description

1

FPGA programming DONE LED

11

SPI header (Arduino/chipKIT compatible)

2

Shared USB JTAG / UART port

12

chipKIT processor reset jumper

3

Ethernet connector

13

FPGA programming mode (JTAG/ Flash)

4

Power select jumper (Ext. supply / USB)

14

chipKIT processor reset

5

Power jack (for optional ext. supply)

15

Pmod headers

6

Power good LED

16

FPGA programming reset button

7

User LEDs

17

SPI Flash

8

User slide switches

18

Artix FPGA

9

User pushbuttons

19

Micron DDR3 memory

10

Arduino/chipKIT shield connectors

20

Analog devices ADP 5052 power supply

RELATED DOCUMENTS:

  1. Arty Board Artix-7 FPGA Development Board Datasheet
  2. Arty Board Artix-7 FPGA Development Board Schmatics

PACKAGE INCLUDES:

  1. 1 X Arty Board Artix-7 FPGA Development Board for Makers and Hobbyists
Weight (KG) 0.094500
Manufacturer Digilent
Model Number Arty Board Artix-7 FPGA
Voltage (V) Powered from USB or any 7V-15V source
Current (A) NA
Power NA
Processor Xilinx Artix-35T FPGA (xc7a35ticsg324-1L)
Frequency 667MHz
Operating System NA
Bluetooth Interface No
Interface 10/100 Mbps Ethernet, USB-UART Bridge
Size (mm) NA
Only registered users can write reviews. Please Sign in or create an account