Due to supply chain disruptions, inflation and changes in currency valuation, please be advised that price and delivery time is tentative and subject to change even after you place your order. Please contact us for updated price before making payment for your order. CLICK HERE for further details.

Raspberry Pi LoRa/GPS HAT Module (868MHz) - 113990254

SKU
MD-00518
PKR7,750.00
Quantity: 0
The Lora/GPS HAT is based on the SX1276/SX1278 transceiver. The add on L80 GPS (Base on MTK MT3339) is designed for applications that use a GPS connected via the serial ports to the Raspberry Pi such as timing applications or general applications that require GPS information.
  • Buy 3 for PKR7,280.00 each and save 6%
  • Buy 10 for PKR6,950.00 each and save 10%
  • Buy 50 for PKR6,615.00 each and save 15%

The Lora/GPS HAT is based on the SX1276/SX1278 transceiver. The add on L80 GPS (Base on MTK MT3339) is designed for applications that use a GPS connected via the serial ports to the Raspberry Pi such as timing applications or general applications that require GPS information.

The transceivers of the Lora/GPS HAT feature the LoRa™ long range modem that provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption. The Lora/GPD HAT can achieve a sensitivity of over -148dBm using a low cost crystal and bill of materials. The high sensitivity combined with the integrated +20 dBm power amplifier yields industry leading link budget making it optimal for any application requiring range or robustness. LoRa™ also provides significant advantages in both blocking and selectivity over conventional modulation techniques, solving the traditional design compromise between range, interference immunity and energy consumption.

This board can calculate and predict orbits automatically using the ephemeris data (up to 3 days) stored in internal flash memory, so the HAT can fix position quickly even at indoor signal levels with low power consumption. With AlwaysLocate™ technology, the Lora/GPS HAT can adaptively adjust the on/off time to achieve balance between positioning accuracy and power consumption according to the environmental and motion conditions. The GPS also supports automatic antenna switching function. It can achieve the switching between internal patch antenna and external active antenna.Moreover, it keeps positioning during the switching process.

FEATURES:

  1. Frequency Band: 868 MHZ/433 MHZ/915 MHZ(Pre-configure in factory)
  2. Compatible with Raspberry Pi 2 Model B/Raspberry Pi 3.
  3. FSK, GFSK, MSK, GMSK, LoRa™and OOK modulation
  4. Preamble detection
  5. Baud rate configurable
  6. Built-in temperature sensor and low battery indicator
  7. Automatic RF Sense and CAD with ultra-fast AFC
  8. Support DGPS, SBAS(WAAS/EGNOS/MSAS/GAGAN)
  9. PPS VS. NMEA can be used in time service
  10. Support SDK command
  11. Built-in LNA for better sensitivity
  12. EASY™, advanced AGPS technology without external memory
  13. GPS support short circuit protection and antenna detection

SPECIFICATIONS:

Lora:

  1. 168 dB maximum link budget.
  2. +20 dBm - 100 mW constant RF output vs. +14 dBm high efficiency PA.
  3. Programmable bit rate up to 300 kbps.
  4. High sensitivity: down to -148 dBm.
  5. Bullet-proof front end: IIP3 = -12.5 dBm.
  6. Excellent blocking immunity.
  7. Low RX current of 10.3 mA, 200 nA register retention.
  8. Fully integrated synthesizer with a resolution of 61 Hz.
  9. FSK, GFSK, MSK, GMSK, LoRa™ and OOK modulation.
  10. Automatic RF Sense and CAD with ultra-fast AFC.
  11. Packet engine up to 256 bytes with CRC.
  12. Built-in temperature sensor and low battery indicator.

GPS:

  1. Power Acquisition:25mA,Power Tracking:20mA.
  2. Compliant with GPS, SBAS.
  3. Programmable bit rate up to 300 kbps.
  4. Serial Interfaces UART: Adjustable 4800~115200 bps,Default: 9600bps.
  5. Update rate:1Hz (Default), up to10Hz.
  6. Protocols:NMEA 0183,PMTK.
  7. Horizontal Position Accuracy:Autonomous<2.5 m CEP.
  8. Timing Accuracy:1PPS out 10ns,Reacquisition Time<1s.
  9. Dynamic Performance Altitude Max.18000m,Maximum Velocity Max.515m/s,Maximum Acceleration 4G.

RELATED DOCUMENTS:

  1. User Guide Line.

PACKAGE INCLUDES:

  1. 1 X Raspberry Pi LoRa/GPS HAT Module (868MHz)
Part Number 113990254
Weight (KG) 0.020000
Manufacturer SeeedStudio
Voltage (Min) NA
Voltage (Max) NA
Output Voltage NA
Power NA
Current (A) 20m
Frequency 868 MHZ/433 MHZ/915 MHZ
Load Cell (kg) NA
Output Type Digital and Analog
Range Programmable bit rate up to 300 kbps.
Temperature Range (Min) -40°C
Operating System NA
Resistance Value (Ohm) NA
Baud Rate 9600
Interface NA
Num of Pin's NA
Diameter NA
Size (mm) NA
Only registered users can write reviews. Please Sign in or create an account